Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: resistanceDescription: RWM 4x10 Series 3W, axial enameled wire wound power resistor, axial lead, fire-resistant Power rating at 70 ° C | 2.6W -------- Power at 25 ° C | 3W Resistance tolerance | ± 5% Temperature coefficient |+75ppm/° C typical limiting element voltage | 120V Temperature cycling | -55 ° C →+200 ° C C Body Length | 12 mm Body Diameter | 5.5 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.2067 -
![]()
Category: resistanceDescription: RWM 4x10 Series 3W, axial enameled wire wound power resistor, axial lead, fire-resistant Power rating at 70 ° C | 2.6W -------- Power at 25 ° C | 3W Resistance tolerance | ± 5% Temperature coefficient |+75ppm/° C typical limiting element voltage | 120V Temperature cycling | -55 ° C →+200 ° C C Body Length | 12 mm Body Diameter | 5.5 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.4110 -
![]()
Category: resistanceDescription: RWM 4x10 Series 3W, axial enameled wire wound power resistor, axial lead, fire-resistant Power rating at 70 ° C | 2.6W -------- Power at 25 ° C | 3W Resistance tolerance | ± 5% Temperature coefficient |+75ppm/° C typical limiting element voltage | 120V Temperature cycling | -55 ° C →+200 ° C C Body Length | 12 mm Body Diameter | 5.5 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.8839 -
![]()
Category: resistanceDescription: Res Wirewound POT 10Ω 10% 25W 1(Elec)/1(Mech)Turn 6mm (78 X 38 X 42mm) Solder Lug Panel Mount Bulk9504 -
![]()
Category: resistanceDescription: Res Wirewound POT 4.7KΩ 10% 25W 1(Elec)/1(Mech)Turn 6mm (50 X 38 X 42mm) Solder Lug Panel Mount Bulk4558 -
![]()
Category: resistanceDescription: VISHAY RSO30250A1R00JB03 Wire wound resistor, 1R, 5%, screw installation new2292 -
![]()
Category: resistanceDescription: VISHAY RPS0500DH6R80JB Resistance, thick film, 6R8, 5%, 5KV, screw installation new6666 -
![]()
Category: resistanceDescription: VISHAY RPS0500DH33R0KN RPS 500D H 33U 10% BO15NA e 70M1041 new9533 -
![]()
Category: resistanceDescription: Res Thick Film 40kΩ 5% 250W ±150ppm/℃ Molded Screw Terminal Bolt-On Box7697 -
![]()
Category: resistanceDescription: Res Thick Film 22Ω 10% 500W ±150ppm/℃ Molded Screw Terminal Bolt-On Box8996 -
![]()
Category: resistanceDescription: 250 W The 500 W Vishay Sfernice RPS series thick film non inductive resistor is used for heat sink installation, especially suitable for harsh pulse applications. The shell opening is easy to install and optimize, and the low heat radiation is installed on the heat sink. Power consumption at 70 ° C: | RPS 250DH: 250W ------- | RPS 500DH: 500W Tolerance: | ± 5% Temperature coefficient: | ± 250 ppm/° C (R | ± 150 ppm/° C (R1 Ω) Maximum service voltage: | 5 kV Effective value Thermal resistance: | RPS 250DH: 0.22 ° C/W | RPS 500DH: 0.11 ° C/W Dielectric stiffness: | 14 kV Effective value Operating temperature: | -55 ° C to+125 ° C9506 -
![]()
Category: resistanceDescription: VISHAY RPS0250DH1003KBZA3 RPS 250D H 100K 10% ZA3 BO15 e 70M0656 new3006 -
![]()
Category: resistanceDescription: Res Metal Film 100Ω 1% 0.5W(1/2W) ±100ppm/℃ 1% Epoxy AXL Bulk6415 -
![]()
Category: resistanceDescription: Res Metal Film 28Ω 1% 0.125W(1/8W) ±100ppm/℃ 0.01% Epoxy AXL Bulk8492
